Whether you enjoy soaking in a bath, or have children who love fizzy bath bombs, you’ll need to know how to clean a bathtub. Typically, bathtubs are magnets for soap scum, grime, and stubborn stains caused by limescale or products. That’s why it’s so important to clean a bathtub regularly and keep bacteria at bay. What’s more, it’s the main feature of any bathroom, so a grimy tub is hardly appealing! But, if your bathroom cleaning products doesn’t seem to be cutting through the grime, there is a much easier way to clean a bathtub.
In fact, all you’ll need are a few basic household items that you probably already have in your kitchen. Best of all, it will take no time at all to clean, saving you on the elbow grease. In addition, it doesn’t involve bleach or other harsh chemicals that you’d find in commercial cleaners, and will save you money in the long run.
So, if you want to cut your scrubbing time in half, here’s how to clean a bathtub in 3 easy steps.
If you’re more a shower person however, check out how to clean a shower head and get rid of limescale. And since you’re already in the bathroom, check out how to clean grout on floor tiles to get rid of stains and how to unclog a drain without using a plunger.
How to clean a bathtub with baking soda
1. Sprinkle baking soda in the bathtub
First, fill a bucket of hot water before pouring the water all over the bathtub. Then, sprinkle baking soda generously over the bathtub, and leave for about 20 minutes. The combination of water and baking soda should start to fizzle, which means it is doing its job to lift scum.
2. Scrub clean with soft cloth
Next, take a soft sponge or microfiber cloth to gently scrub the bathtub, and remove any soap scum or grime around the tub. Avoid using abrasive sponges, or cleaning materials that may scratch the surface. Fiberglass tubs in particular are prone to cracking, scratching, and fading over time. For stubborn stains, add a little baking soda to a toothbrush and gently scrub at the area to remove the stain.
3. Rinse to remove grime
Once the bathtub is all clean, rinse the bathtub well with a hand sprayer or shower head to remove all traces of dirt and baking soda residue.
How to clean a bathtub with white vinegar or dish soap
1. Fill a bathtub with water
For a heavily soiled or grimy bathtub, put the plug in and fill the tub with hot water. Alternatively, you can just fill a spray bottle with a half-and-half solution of vinegar and warm water for mild stains.
2. Pour vinegar into the bathtub
Next, pour two cups of white vinegar or 4-6 squirts of dish soap into the bathtub. Leave the mixture to sit in the tub for about 15-20 minutes to effectively lift the grime off. You can leave for a little longer, depending on how grimy your tub is.
3. Drain tub and scrub well
Then, drain the tub of the mixture before scrubbing all surfaces clean with a microfiber cloth or soft sponge. Finally, rinse well with using a shower head or hand spray, until all residue is gone.
How to remove hardwater stains
1. First, soak a cloth or paper towels in white vinegar before applying to the stained areas. Leave to sit for a couple of hours to allow it to work in lifting of the limescale. Or you can leave overnight for better results.
2. Finally, scrub the area clean with a microfiber cloth or use a toothbrush for those awkward spots, to remove signs of limescale. If you’re tackling bathtub faucets, this Tik Tok lemon hack to remove limescale on faucets may do the trick.
How often should you clean your bathtub?
Ideally, you should clean a bathtub after each use to minimize the build-up of dirt and bacteria. However, it’s advised to do a deep clean at least once a week to keep it spotless and hygienic. The same applies for your shower.
Check out these 10 things you didn’t know you could clean with baking soda when you’re cleaning every room in your home. And bear in mind these 7 things not to clean with bleach to avoid major damage!
For all the latest Technology News Click Here
For the latest news and updates, follow us on Google News.
Denial of responsibility! NewsBit.us is an automatic aggregator around the global media. All the content are available free on Internet. We have just arranged it in one platform for educational purpose only. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials on our website, please contact us by email – [email protected]. The content will be deleted within 24 hours.
