The adrenaline of gamers will keep them awake all night, but the common problems that might arise in the PC will also keep them awake all night—just like any other electronic or instrument, the gaming computer requires maintenance. However, it is normal for gaming computers to have operational issues. Mega gaming components perform heavy-duty functions, and any carelessness, even to a minor degree, will result in this. Now that you’ve studied these common issues, you’ll be able to deal with them more effectively.
What are the Most Common Gaming PC Issues?
A PC is a complex, high-performance working computer in and of itself, and gaming PCs are built to a higher standard than regular PCs. The burden on models is far greater, and the most popular culprits are:
The Computer Isn’t Turning On
There are a variety of reasons why a computer won’t turn on.
PC Isn’t Getting Enough Power
It’s possible that the machine isn’t getting enough fuel, which is why it won’t turn on. Check to see if the power source is working. If the source is working properly, check the power cord to see if it is receiving power from the source—if the power cord is working, then check the power button.
The PSU (Power Supply Unit) is broken.
If you’ve double-checked that your computer is getting power but it still won’t turn on, the problem isn’t due to external hardware. It’s possible that PSU is dealing with certain problems that need to be addressed;
- Examine the power cord’s link to the power supply unit.
- The PSU’s power switch is set to “On.”
- Most of the time, the gaming PCs switch on after double-checking the power cable, as this is the most common cause of failure—if it doesn’t, the power supply device is the issue.
Changing a PSU: Since the PSU is confirmed to be defective, it must be replaced right away. Replace the PSU that is appropriate for your device.
How to Replace a Power Supply Unit
After you’ve found the right model for your PC, there are around 3-4 connections to keep track of on a mid-range PC. A big 24-pin connection connects to the motherboard, an 8-pin connector connects to the CPU, and the rest are SATA connectors. Attach the connectors and start the computer. A dead level gaming pc has more connectors than that; the graphics often need power connections, so keep an eye out for a 6-pin PCI-E connector.
The computer will not start.
The issue this time is that your computer is turning on but not booting. This time, it’s not the power supply or the power source that’s causing the problem; instead, it’s the internal hardware or software. The type of issue is determined by the mistake. You could be using best motherboard for i9-9900k, still facing issue?
The monitor would not turn on.
When you turn on the computer and the monitor does not show anything, however the computer still works, the monitor is to blame. Test the keyboard and other attached devices for functionality; if they are, replace the monitor and check again.
The Monitor Isn’t Defective
If the monitor is working but the computer isn’t, you’ll need to figure out what’s causing the POST (Power on Self-Test) protocol to fail. Any major component of the PC that fails could cause the entire PC to stop working, so the issue of “how to check the PC’s components?” arises.
How do I check the components of my computer?
This is possible if you have a spare PC with at least a certain level of compatibility with the current one. Swap the elements in order to test them (knowing that the other one is completely operational). Second, look over these;
Hard drive Processor RAM Motherboard
And if one or more of the components isn’t working, replacing them will aid in getting the PC back up and running. The most important consideration is the model; for example, if you’re looking for an external hard drive for your gaming computer, choose one with a long track record of good quality.
The Ram is the perpetrator; they must be replaced.
If you’ve had a POST failure, the issue is most likely with the RAM module. They’re plugged into the motherboard, so treat them as follows:
- Remove them all (if there are more than one)
- Connect one to the other (at one time)
- Start the computer.
- Check to see whether it’s working or not.
- If the computer is operational, turn it off and replace the RAM.
- If it doesn’t work this time, the culprit is the relevant RAM.
- Rep this procedure for each RAM.
- The Culprit is the Motherboard.
If all of the other components operate on the spare PC but not on the defective one, the motherboard is likely to be the source of the problem. As a result
Using the cleaning solvent, disinfect the motherboard.
Allow time for it to dry.
Check it once more.
Replace the motherboard if it still doesn’t fit.
If you’re replacing a gaming motherboard, make sure it’s in the high-quality category for dependable results.
The machine is constantly shutting down.
If you were about to take that mind-blowing first place in the competition in your game, and right before the decision was taken, your ultimate gaming PC just stopped working and shut down, booyah! This is the point at which one begins to doubt one’s own existence. That individual may be the culprit for a variety of reasons.
Heating Things Up
The majority of the time, PCs are built to withstand heat to some degree, but when the limit is reached, they automatically shut down or trip off the fuel. They sense an unusually high temperature and shut down the computer to prevent the computer’s components from burning out or being damaged.
How Should Non-Operational Fans Be Treated?
You should give it a shot;
Dust Cleaning: Sometimes, debris or dust accumulates on the internal structure of the PC, especially around the fans, obstructing air flow.
Check the Connector: If you’ve turned on your computer and noticed that the fan isn’t working, look at the connector to it.
Replace the Fan: If the connector is working and the fan is getting electricity, there is likely some harm. Replace the fan and check again.
Even if the fans stop running, the computer continues to heat up.
If the fans are working properly and there was no problem, but the PC keeps shutting down, the issue might not be those—the heating may be due to the fact that your previous thermal paste is now past its expiration date.
What Is the Best Way to Use Thermal Paste?
Thermal paste will assist the PC in coping with excessive shutting down by preventing the PC from shutting down on its own. How to do it correctly;
- Invest in a good tube of thermal paste.
- Remove the processor’s heat sink.
- Apply a small amount of rubbing alcohol to the leftover/overdue thermal paste and rinse it off with a smooth non-linted cotton.
- Allow 4 to 5 seconds for the rubbing alcohol to dry.
- Fresh thermal paste should be applied directly to the processor’s tip (CPU chip).
- Reassemble the heat sink and reseat it with the applied paste.
- Install the heat sink to see if the issue has been resolved.
The monitor turns off, but the computer remains operational.
If you turn on the computer and it works normally but the monitor lowers the output on the same side but the computer continues to work, there may be a variety of causes. While this issue is not as popular as others, it can still be a pain in the gaming chair. To determine the solution to this issue;
Examine the GPU
Remove the graphic card if the graphic processing unit is the source of the problem. Since most monitors have onboard graphic chips, check the monitor after removing the dedicated graphics card; if the monitor does not properly launch the display, the issue is with the PSU.
Examine the power supply unit.
If the display error persists, the issue is not with the GPU, but rather with the power supply. It’s possible that it’s attempting to run so many dedicated peripherals. Disconnect all of the links to the SATA power supply (hard drive, optical drive etc.) Simply leave the simple ones alone and check to see if the machine is powered up.
Is the Error Still Present?
If the error persists after all of these attempts, replace the power supply using the method outlined above. Checking the machine with a spare PC will help you figure out the issue much faster.
For more information, visit: compareget.com/
