Quick News Bit

Low-cost titanium armor for land-based defense platforms

0
Low-cost titanium armor for land-based defense platforms
The attack and rear faces of the perforated plates were photographed. Pass and fail shots were selected from each plate and sectioned parallel and across the penetration direction for further examination. Credit: Materials Science and Technology (2023). DOI: 10.1080/02670836.2023.2229175

The aim of the Affordable Titanium to Useable Defense Equipment (ATiTUDE) program is to develop a processing route for low-cost titanium for exploitation across the land, maritime and air defense sectors. The project is led by Rheinmetall BAE Systems Land (RBSL). Other members that make up the consortium are the University of Sheffield (UoS), BAE Systems, MBDA, Transition International and the Advanced Forming Research Center (AFRC).

By using the FCT HP D 250 (FAST/SPS) followed by the FENN Hot Rolling Mill in Phase 2 (both accessed at the Royce Discovery Center at the University of Sheffield) it has been possible to create armor plate for ballistic protection in land-based applications.

The majority of land-based military vehicles employ Rolled Homogeneous Armor (RHA) or high hardness steel (HHS) armors, which are comparatively cheaper than titanium. However, titanium alloys have a high mass efficiency in comparison to RHA and can provide a 30%–40% weight reduction while maintaining survivability.

The development of a powder metallurgy processing route for titanium alloys has the potential to eliminate many thermo-mechanical processing steps, especially if this can be combined with a low-cost feedstock such as oversized Ti powder or machining swarf.

Ballistic testing of Ti-64 armor plate produced from both low-cost powder and swarf via the FAST process, has demonstrated that it meets the MIL-Spec V50 ballistic limit requirement against a given threat. This work presents an exciting opportunity for the development of a sustainable closed-loop production route for low cost armor in a range of new applications.

The paper is published in the journal Materials Science and Technology.

More information:
Beatriz Fernández Silva et al, Effect of processing route on ballistic performance of Ti-6Al-4V armour plate, Materials Science and Technology (2023). DOI: 10.1080/02670836.2023.2229175

Provided by
University of Sheffield


Citation:
Low-cost titanium armor for land-based defense platforms (2023, July 6)
retrieved 6 July 2023
from https://techxplore.com/news/2023-07-low-cost-titanium-armor-land-based-defense.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.

For all the latest Technology News Click Here 

 For the latest news and updates, follow us on Google News

Read original article here

Denial of responsibility! NewsBit.us is an automatic aggregator around the global media. All the content are available free on Internet. We have just arranged it in one platform for educational purpose only. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials on our website, please contact us by email – [email protected]. The content will be deleted within 24 hours.

Leave a comment