iQOO 11 Pro design similar to iQOO 10 Pro, official renders reveal

iQOO 11 series launch date confirmed, design teased

As seen in the promotional poster above, this is what the iQOO 11 Pro will look like. The device will have a quad rear camera setup located inside a rectangular island. The camera bump will feature a dual-tone finish. The area in black will make room for three cameras, a dual-tone LED flash, and the V2 (Vivo’s in-house imaging chip) branding. The silver area will room for another sensor and an “Ultra Sensing” branding. Lastly, the iQOO 11 Pro will feature a leather-like back with the brand’s iconic BMW Motorsport strips vertically aligned to the right.

The power button and the volume up and down buttons will be on the right side of the device, while the left side will be left vacant. Upon closer inspection, we can notice antenna linings at the top and the bottom of the device, which suggest that the iQOO 11 Pro will come with a metal chassis.

iQOO 11 Pro specifications (expected)

The iQOO 11 Pro is reportedly going to feature a 6.78-inch E6 AMOLED 2K display with a 144Hz refresh rate. Under the hood, the device will come powered by the latest Snapdragon 8 Gen 2 processor, which will be paired with up to 16GB RAM and up to 512GB onboard storage. Coming to the OS, the iQOO 11 Pro is tipped to boot Android 13 out of the box.

In terms of cameras, the device is expected to sport a 50MP + 50MP + 48MP + 64MP quad rear camera setup and a 32MP front camera. Lastly, the iQOO 11 Pro will most likely feature a 4,700mAh battery with support for a whopping 200W fast charging over a USB Type-C charging port.